128 Teleport Pro\n\nPro\nTeleport Pro Project (*.tpp)\n.tpp\nPro.Document\nTeleport Project
129 Teleport Pro\n\nPro\nTeleport Pro Project (*.tpp)\n.tpp\nPro.Document\nTeleport Project
1078 Deletes all pages and files from the project database\nFlush Project Database
3000 You cannot add more file type categories to the the project.
3001 A directory named after your project name cannot be created. Please choose a different name for your project, and save it again.
3002 Warning: Loading a new project configuration will overwrite your current project's configuration. Are you sure you want to do this?
3003 Warning: Flushing the project database will delete everything in the project except your starting pages and the project configuration. Are you sure you want to do this?
3004 Warning: This action will delete the retrieved files from your hard disk for every selected address, as well as every page and file owned by the selected addresses. It will also permanently prevent Teleport Pro from retrieving any of these files in the future. Are you sure you want to do this?
3005 Sorry! Until registered, Teleport Pro cannot retrieve more than %lu files in a single project. This limitation can be removed completely by registering the program.
3006 Project Session Completed. No available files matching this project's retrieval specifications were found.
3007 There are no enabled, out-of-date files to retrieve, given the current project configuration. The Refresh command has been canceled. You must enable some files, change the file expiration period, or add new addresses, before the Refresh command can do anything.
3008 There are no unretrieved files in this project, given the current project configuration. The Start command has been canceled. Try using the Refresh command, instead, to make sure all files are up-to-date.
3009 Project Session Completed. No new files matching this project's retrieval specifications were found, and no old files were out-of-date.
3010 Project Session Completed. No files were read during this session. It is likely that there is an error in your connection to the Internet, or that the project's Starting Address(es) are invalid, or that the remote server(s) are down.
3011 Project Session Completed. No files were read during this session. Since this project appears to have run successfully in the past, it is likely that the remote server is down. Alternatively, there could be an error in your connection to the Internet, or the project's Starting Address(es) are invalid.
3012 Project session completed. %lu files were retrieved.
3013 Please enter your name! We need that to process your order, and to generate your registration code.
3014 You must enter a valid email address. Your registration code will be sent to this address as soon as your order is processed.
3015 When paying by credit card, you must enter the billing address for your credit card. Please be sure to include your street address, city, and zip or postal code.
3016 You must enter your credit card number before the order is sent. The number and expiration date will be encrypted before transmission to our site.
3017 The credit card number you have entered is not a valid Visa, Mastercard, American Express, or Discover card number. Please check the number and try entering it again.
3018 You must enter the date on which your credit card expires.
3019 The expiration date you have entered is invalid or has already expired. Please check the date and enter it again.
3020 The email address you have entered appears to be invalid. The address should be of the form name@server, where name is your email name and server is your mail host. Please check the address and try entering it again.
3021 The name you have entered is too short to be complete! Please enter your full name, or the name that appears on your credit card if paying by credit card.
3022 Thank you! Your copy of Teleport Pro is now registered. All limits have been removed.
3023 We're sorry! The registration number you entered appears to be invalid. Please check the number and try entering it again.
3024 Sorry! The free evaluation period for Teleport Pro is limited to %lu uses, and this copy of the program has now expired. Full, unrestricted use of the program can be still be restored by registering it! See the Register command under the Help menu for more information.
3025 Teleport Pro cannot connect to the first address you have specified. If you are on a corporate intranet or LAN, make sure that your Proxy settings are correct. Otherwise, be sure you are using a 32-bit (or compatible 16-bit) winsock connection, and that your host server is operating properly.
3026 Hello, New User! Your free evaluation period for this shareware program has just begun. You will have %lu uses of the program to evaluate it, and then it will expire, unless registered.
3027 Hello again! You're halfway through the free evaluation period for Teleport Pro; we hope you're enjoying using it. You have another %lu uses left, and then the program will expire, unless registered.
3028 Hello again! After this session, you will have only one more opportunity to use Teleport Pro before its free evaluation period expires. Once the evaluation period expires, you must register the program to continue using it.
3029 Hello again! This session marks the end the free evaluation period for this program. You can prevent Teleport Pro from expiring by (1) never turning off your computer, or (2) registering the program. We hope you've enjoyed using it, and will choose Option 2. Thank you!
3030 Warning: The Internet subsystem (winsock.dll) on this machine can handle only %lu simultaneous connections. You may wish to upgrade to a new winsock system.
3031 Warning: If you change this project setting, Teleport Pro will not be able accurately to resolve file name collisions with respect to files that it has already loaded. The potential result is that some files in your project folder may be overwritten, and some existing HTML links will no longer point to the proper files. Are you sure you want to do this?
3032 Teleport Pro cannot find your browser, or cannot open it at this time. Try opening it directly from the Start menu, and then enter this address--\n\nhttp://www.tenmax.com/prohelp.html
3033 Teleport Pro cannot find your mail program, or cannot open it to send mail at this time. Try opening it directly from the Start menu, and then mail us at support@tenmax.com.
3034 Teleport Pro cannot find our browser, or cannot open it at this time. Try opening it directly from the Start menu, and then enter this address--\n\nhttp://www.tenmax.com/proreg.html
3035 Teleport Pro could not locate the Windows CompuServe Infomation Manager (WinCIM) program. Try running it directly from the Start menu, then GO SWREG to register Teleport Pro.
3036 Teleport Pro found your CompuServe program (WinCIM) but cannot open it. Try running the program from the Start menu, then GO SWREG to register Teleport Pro.
3037 The address you have entered already exists in the project database, and cannot be made into a Starting Address. You can flush the project database and start over, or create a new project starting at this address.
3038 The project file you have specified is corrupted or invalid and cannot be loaded.
3049 Teleport Pro cannot find this file to open it. The file was read by Teleport Pro, but possibly not saved to disk because your Project Properties did not specify retrieving files of this type, at the time the file was read. You can use the Retrieve Now command to retrieve this file now, and then try the Open command again.
3050 This file no longer exists in the Project folder, or is unavailable and cannot be opened.
3051 Windows 95 is out of memory or resources, and cannot open this file.
3052 The program normally used to open this file is invalid or cannot be run.
3053 The Windows 95 association between this filename and the program used to open it is missing or invalid.
3054 The DDE system normally used to open this document is busy or cannot be used to access this document.
3055 Your order form was saved at the following location:\n\n%s\n\nPlease make a note of it, so that you can locate it later when you need to email it or print it.
3056 Thank you! Your order form has been spooled to the printer.
3057 Warning: This is an Internet Marauder project file. It has been converted to the extent possible into a Teleport Pro project. When you save this project, it will overwrite the original file, making it unusable with Internet Marauder. If you want to keep your original file, choose Save As from the File menu to save this project with a different name.\n\nPlease note also that you must use the Refresh command when running this project for the first time.
3058 Teleport Pro cannot open an Internet connection at this time. If you have other Internet applications open, try closing them and then running this project again.
3059 The Project Folder cannot be opened at this time. This function is unavailable under Windows NT 3.51.
32771 Displays the Project Properties dialog box\nProject Properties
32772 Loads a project configuration from disk\nLoad Configuration
32773 Edits the parameters of a starting address\nEdit Address
32775 Refreshes this project, retrieving new files and updating old ones\nRefresh
32776 Immediately terminates running this project; any partially retrieved data is lost\nAbort
32777 Pauses this project\nPause
32778 Adds a new starting address to the project\nAdd Starting Address
32779 Deletes the selected address and all related addresses\nDelete address
32780 Waits for all retrieval threads to finish, then stops running the project\nStop
32781 Starts running this project, retrieving only new links and files\nStart
32782 Displays files in a multi-columned list\nList View
32783 Displays files with date, size, and owner information\nDetail View
32785 Adds graphic files to the File Types list\nGraphics
32786 Adds text-type files to the File Types list\nText
32787 Adds executable files to the File Types list\nExecutable
32788 Adds a user-defined category of files to the File Types list\nUser
32789 Adds archive-type files to the File Types list\nArchive
32790 Adds sound files to the File Types list\nAudio
32791 Adds video files to the File Types list\nVideo
32802 Displays the properties for this file or page\nFile Properties
32803 Opens this file with another application\nOpen With
32804 Opens this document using its default application\nOpen File
32805 Immediately retrieves this file or page from the Internet\nRetrieve Now
32806 Sets the proxy server parameters for the program\nProxy Server
32807 Saves a project configuration to disk\nSave Configuration
32808 Starts the New Project Wizard\nNew Project Wizard
32811 Opens a new Teleport Pro window\nNew Window
32812 Saves this project, its settings, and the project database\nSave Project
32813 Disables this page or file, preventing it from being retrieved later\nDisable
32814 Enables this page or file, allowing it to be retrieved later\nEnable
32815 Pauses this thread\nPause
32816 Immediately stops retrieving this file\nAbort
32818 Registers this copy of Teleport Pro\nRegister
32819 Displays information about how to get technical support\nTech Support
32820 Views this page or file using the default "view" application\nView File
32821 Selects all files in the List View\nSelect All
32822 Views this page or file using the default "edit" application\nEdit File
32823 Opens the project folder on the desktop\nOpen Project Folder
57344 Teleport Pro
57345 Ready
57600 Creates a new project\nNew Project
57601 Opens an existing project\nOpen Project
57602 Closes this project\nClose
57603 Saves this project, its settings, and the project database\nSave Project
57604 Saves this project with a new name\nSave As
57612 Sends this project through electronic mail\nSend Mail
57616 Opens this project
57617 Opens this project
57618 Opens this project
57619 Opens this project
57620 Opens this project
57621 Opens this project
57622 Opens this project
57623 Opens this project
57624 Opens this project
57625 Opens this project
57626 Opens this project
57627 Opens this project
57628 Opens this project
57629 Opens this project
57630 Opens this project
57631 Opens this project
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copies the selected item and puts it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Displays program information, version number and copyright\nAbout
57665 Quits this application\nExit
57666 Displays online help for this program\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
59394 Shows or hides the ThreadBar\nToggle ThreadBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore the window to normal size
61203 Activate Task List
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
